Quick Contact
Tel:  03 9764 8633
Fax: 03 9764 8979
Electron Vacuum Systems Pty Ltd
48 Jellico Drive Scoresby, Victoria.
Australia 3179
Bg

Products -> Power Units -> FB Series

electronvac FB200
Download

electronvac FB200

Model FB200
   
Vacuum Motor Specifications  
   
Tangential By-pass discharge l
Flow Through discharge  
Double ball bearings l
Diameter of Motor mm 145
Air Watts 405
Airflow l/s (max.) 50
Sealed Vacuum mm H2O (max.) 2450
RPM @19mm working orifice 21200
Label Rated Electrical Watts 1400
Noise Level dbA with Silencer @ 3m 68.5
Temperature Sensistive Thermal Protector l
Control Circuit 12 V DC l
Control Current 100mA l
Nominal Voltage 240 V AC l
Nominal Frequency 50 Hertz l
   
Power Unit Physical Specifications  
   
Overall Height (mm) 705
Overall Diameter (mm) 330
Overall Weight (kg) 6.7
Dual Filtration Compatible System  
Cyclonic Filtration (Standard)  
HFPC Filter Cartridge  
Filter Bag Filtration l
Silencer for Exhaust l
Left & Right ducting entry points l
Direct Inlet point with On/Off switch  
Wall Mounting of Power Unit l
Body Housing Construction ABS
Dirt Capacity litres 20
   
Authority Approvals / Origin  
   
"C" Tick Compliance EMC - AS/NZS 1044 l
Made in Australia l
   
Installation Recommendations *  
   
Size of Building up to Squares 30
Number of Inlet Points 4
Number of Aux Points 2
Working Hose length - up to metres 12
Max distance to furtherest point metres  
Hide-A-Hose Compatible  
   
   
   
Notes:-  
   
Instalaltion Recommendations shown is only an approxiate guide and may vary to actual construction specifications and layout of building. Please consult with your installer for appropriate model.
   
Specifications subject to change without notice. EOR  

 

 
 

Quick Contact
Tel:  03 9764 8633
Fax: 03 9764 8979
Electron Vacuum Systems Pty Ltd
48 Jellico Drive Scoresby, Victoria.
Australia 3179
Bg