| Model |
3505 |
| |
|
| Vacuum Motor Specifications |
|
| |
|
| Tangential By-pass discharge |
l |
| Flow Through discharge |
|
| Double ball bearings |
l |
| Diameter of Motor mm |
145 |
| Air Watts |
515 |
| Airflow l/s (max.) |
48 |
| Sealed Vacuum mm H2O (max.) |
3150 |
| RPM @19mm working orifice |
18250 |
| Label Rated Electrical Watts |
1500 |
| Noise Level dbA with Silencer @ 3m |
65.5 |
| Temperature Sensistive Thermal Protector |
l |
| Control Circuit 12 V DC |
l |
| Control Current 100mA |
l |
| Nominal Voltage 240 V AC |
l |
| Nominal Frequency 50 Hertz |
l |
| |
|
| Power Unit Physical Specifications |
|
| |
|
| Overall Height (mm) |
840 |
| Overall Diameter (mm) |
310 |
| Overall Weight (kg) |
7.3 |
| Dual Filtration Compatible System |
l |
| Cyclonic Filtration (Standard) |
l |
| HFPC Filter Cartridge |
l |
| Filter Bag Filtration |
|
| Silencer for Exhaust |
l |
| Left & Right ducting entry points |
l |
| Direct Inlet point with On/Off switch |
l |
| Wall Mounting of Power Unit |
l |
| Body Housing Construction |
ABS |
| Dirt Capacity litres |
25 |
| |
|
| Authority Approvals / Origin |
|
| |
|
| "C" Tick Compliance EMC - AS/NZS 1044 |
l |
| Made in Australia |
l |
| |
|
| Installation Recommendations * |
|
| |
|
| Size of Building up to Squares |
40 |
| Number of Inlet Points |
8 |
| Number of Aux Points |
4 |
| Working Hose length - up to metres |
12 |
| Max distance to furtherest point metres |
|
| Hide-A-Hose Compatible |
l |
| |
|
| |
|
| |
|
| Notes:- |
|
| |
|
| Instalaltion Recommendations shown is only an approxiate guide and may vary to actual construction specifications and layout of building. Please consult with your installer for appropriate model. |
| |
|
| Specifications subject to change without notice. EOR |
|
